Merry Christmas & Happy New Year

Our Offices will be closed 12/21/2017 11/00 AM and Open 12/26/2017

Please Enjoy the Holidays!! Drive Safe

Memorial Day

From all of us at

Arizona Mirage Pool Service & Repairs

Would like to thank All of those that gave their lives for our Country!

In observation of the Holiday our offices will be closed from

Friday 5/24/2013 12:00 pm and reopen on Tuesday 5/28/2013

Please have a Safe and Happy Weekend!!

Brian, Susan, Tom, Nancy, Bryce, Adam, Kyle, Vince, Tyler, and Ryan

10 Common Swimming Pool Maintenance Mistakes

10 Common Mistakes

It’s summer time and that means POOL TIME! Taking care of your pool isn’t easy though, here is a list of 10Common Mistakes people make when maintaining there pool:

  1. Not checking your pool’s chemistry often enough. Check the pool’s chemistry twice per week in the summer and once per week in the winter. By doing this you can make minor adjustments to your water chemistry instead of big adjustments that create a wild up and down graph of activity.
  2. Not running pumps long enough. You should run your pump about 1 hour for every 10 degrees of temperature. This assumes you have a decent circulation system. It is ALL about the FLOW! Circulation IS the key to a low maintenance swimming pool.
  3. Allowing pH to get above 8.0. At 8.5 chlorine is only 10% active. At 7.0 it is about 73% active. By just maintaining pH around 7.5 the chlorine is 50-60% active. Keeping the pH in check will allow you to use to the full potential the chlorine that is already in the pool.
  4. Not keeping alkalinity between 80-140 PPM. Low or high alkalinity can affect water balance and ultimately a sanitizer’s ability to perform.
  5. Not checking TDS (Total Dissolved Solids) or calcium hardness on a regular basis. Check TDS every 6 months and calcium hardness every month. These also affect water balance which is different from sanitation, although related.
  6. Not cleaning the cells in salt water systems (chlorine generators). Corroded or calcified cells will produce little chlorine.
  7. Backwashing sand or DE filters too often. If you do this, the filter can never reach its cleaning potential. If you backwash on a regular basis for no reason, you are wasting water. Most filters require backwashing when the pressure gauge rises 8-10 PSI from clean.
  8. Not cleaning the skimmer basket and/or hair and lint pot in the pool pump often enough. If these are full of debris you will get little flow resulting in poor circulation, potentially creating a big problem.
  9. Not brushing the walls and tile down often enough. If your circulation system is suspect, and many are, brushing down the walls will help eliminate algae problems. Keeping your tile clean will save you money. Once the tile gets calcified it becomes like plaque and will take a specialist to get it off.
  10. Make sure that you keep the space between the bottom of the cantilever on the deck and the top of the tile in check. If this cracks, then put in some silicon. You do not want water migrating from the inside of the pool out under the decking.

No of course the biggest mistake anyone can make is not hiring Arizona Mirage Pool Service and Repair! We are here to serve Litchfield Park, Goodyear, Avondale, Buckeye, Surprise, Phoenix and the rest of the “Valley of the Sun” so keep us in mind if you need anything!

From Green to Clean